Typical Malfunction Thresholds
TYPICAL MALFUNCTION THRESHOLDS - DESCRIPTION CHART
| When either condition below is met: | A or B |
| A. Frequency that both of following conditions 1 and 2 met: | 5 times or more |
| 1. Deviation in engine speed (target and actual) | Less than -100 rpm or more than 150 rpm (when shift position D and A/C OFF) |
| 2. Vehicle condition | Stop after vehicle was driven by 6 mph (10 km/h) or more |
| B. Frequency that both of following conditions 3 and 4 met: | Once |
| 3. Deviation in engine speed (target and actual) | Less than -100 rpm or more than 150 rpm (when shift position D and A/C OFF) |
| 4. IAC flow rate learning value | 0.5 L/sec or less, 6.4 L/sec or more |