LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> Sienna XLE, AWD >> Repair and Diagnosis >> Electrical >> Starter >> Starting System >> Starter >> Removal

Starting System: Starter: Removal

  1. REMOVE BATTERY  (See REMOVAL )
  2. REMOVE NO. 2 AIR CLEANER INLET  (See REMOVAL )
  3. REMOVE AIR CLEANER CAP SUB-ASSEMBLY  (See REMOVAL )
  4. REMOVE AIR CLEANER FILTER ELEMENT  (See REMOVAL )
  5. REMOVE AIR CLEANER CASE SUB-ASSEMBLY  (See REMOVAL )
  6. REMOVE AIR CLEANER BRACKET 
    1. Remove the 2 bolts and the air cleaner bracket.
      Fig 1: Locating Air Cleaner Bracket Bolts
      G05136479Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  7. REMOVE NO. 1 AIR CLEANER INLET 
    1. Remove the bolt and the No. 1 air cleaner inlet.
      Fig 2: Locating No.1 Air Cleaner Inlet Bolt
      G05140026Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  8. REMOVE STARTER ASSEMBLY 
    1. Disconnect the starter connector.
    2. Open the terminal cap and remove the nut and the starter wire.
      Fig 3: Identifying Terminal Cap
      G05140027Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Remove the 2 bolts and the starter.
      Fig 4: Locating Starter Bolts
      G05140028Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals