Valve Body Assembly: Installation

1. Install the shift solenoid valve SL1 to the valve body assembly with the bolt.

   Torque: 6.6 N*m (67 kgf*cm, 58 in.*lbf) 

   Fig 1: Identifying Shift Solenoid Valve SL1 Bolt

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the shift solenoid valve SL2 to the valve body assembly with the bolt.

   Torque: 11 N*m (110 kgf*cm, 8 ft.*lbf) 

   Fig 2: Identifying Shift Solenoid Valve SL2 Bolt

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Install the shift solenoid valve DSL to the valve body assembly with the bolt.

   Torque: 11 N*m (110 kgf*cm, 8 ft.*lbf) 

   Fig 3: Locating Shift Solenoid Valve DSL Bolt

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Install the shift solenoid valve SR to the valve body assembly.
   Fig 4: Identifying Shift Solenoid Valve SR

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
5. Install the shift solenoid valve S4 to the valve body assembly with the bolt.

   Torque: 11 N*m (110 kgf*cm, 8 ft.*lbf) 

   Fig 5: Locating Shift Solenoid Valve S4 Bolt

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
6. Install the shift solenoid valve SL3 and SLT to the valve body assembly.
7. Install the lock plate to the valve body assembly with the bolt.

   Torque: 6.6 N*m (67 kgf*cm, 58 in.*lbf) 

   Fig 6: Identifying Shift Solenoid Valve SLT And SL3

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
8. Install the spring and check ball body.
   Fig 7: Identifying Check Ball Body And Spring

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
9. Align the groove of the manual valve with the pin of the lever.
10. Install the 17 bolts.

    Torque: 11 N*m (110 kgf*cm, 8 ft.*lbf) 

    NOTE:

    • Push the valve body against the accumulator piston springs and check ball body to install the valve body.
    • First, temporarily tighten the bolts marked with (1) in the illustration because they are positioning bolts.

    Bolt length: 

    Bolt A: 

    41 mm (1.614 in.) 

    Bolt B: 

    57 mm (2.244 in.) 

    Bolt C: 

    25 mm (0.984 in.) 

    Fig 8: Locating Transmission Valve Body Assembly Bolts

    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Coat a new O-ring with ATF.
2. Install the O-ring to the oil strainer.
   Fig 9: Locating Valve Body Oil Strainer O-Ring

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Install the oil strainer with the 3 bolts.

   Torque: 11 N*m (110 kgf*cm, 8 ft.*lbf) 

   Fig 10: Locating Oil Strainer Bolts

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Coat the O-ring with ATF.
2. Install the ATF temperature sensor with the lock plate and bolt.

   Torque: 6.6 N*m (67 kgf*cm, 58 in.*lbf) 

3. Connect the 7 shift solenoid valve connectors.
   Fig 11: Locating Shift Solenoid Valve Connectors

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Install the 2 magnets in the oil pan.
2. Apply seal packing or equivalent to the 18 bolts.

   Seal packing: 

   THREE BOND 2430 or equivalent 

   Fig 12: Identifying Magnets

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Install the oil pan and new gasket with the 18 bolts to the transaxle case.

   Torque: 7.8 N*m (80 kgf*cm, 69 in.*lbf) 

   NOTE: Tighten the bolts within 10 minutes of sealant application.

HINT:

(See INITIALIZATION  )

Fig 13: Locating Oil Pan Bolts

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002