Front Lower Suspension Arm: Installation

1. Install the front lower arm bush stopper to the front suspension arm sub-assembly lower No.1 LH.
2. Install the bolt and nut to the rear side of the front suspension arm sub-assembly lower No.1 LH.

   Torque: 206 N*m (2,100 kgf*cm, 152 ft.*lbf) 

   Fig 1: Installing Bolt And Nut On Rear Side Of Front Suspension Arm Sub-Assembly Lower LH

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Install the 2 bolts on the front side of the front suspension arm sub-assembly lower No.1 LH.

   Torque: 200 N*m (2,040 kgf*cm, 148 ft.*lbf) 

   Fig 2: Installing Bolts On Front Side Of Front Suspension Arm Sub-Assembly Lower LH

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Install the transverse engine mounting insulator with the 3 nuts.

   Torque: 87 N*m (887 kgf*cm, 64 ft.*lbf) 

Fig 3: Installing Transverse Engine Mounting Insulator With Nuts
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

HINT:

(See INSTALLATION )