Emission Control System: Canister: Installation

INSTALL CHARCOAL CANISTER ASSEMBLY
1. Install the 3 bolts and charcoal canister.
  Torque: 29 N*m (296 kgf*cm, 21 ft.*lbf)
2. Connect the purge line hose to the charcoal canister.
3. Connect the wire harness clamp.
4. Connect the vapor pressure sensor connector.
5. Connect the charcoal canister filter sub-assembly to the charcoal canister.
6. Connect the fuel tank vent hose to the charcoal canister.
  
  Fig 1: Identifying Charcoal Canister And Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL CHARCOAL CANISTER PROTECTOR
1. Install the 6 bolts and charcoal canister protector.
  Torque: 5.0 N*m (51 kgf*cm, 44 in.*lbf)