LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> Sienna LE, AWD >> Repair and Diagnosis >> Electrical >> Starter >> Starting System >> Starter Relay >> On-Vehicle Inspection

On-Vehicle Inspection

  1. INSPECT STARTER RELAY 
    1. Using an ohmmeter, measure the resistance between each terminal.

      Standard resistance 

      STARTER RELAY

      Tester Connection Specified Condition
      3 - 5 10 kΩ or higher
      3 - 5 Below 1 Ω (when battery voltage is applied to terminals 1 and 2)

      If the result is not as specified, replace the starter relay assembly.

      Fig 1: Identifying Starter Relay
      G04943935Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals