How To Proceed With Troubleshooting

The intelligent tester can be used at step  2,  5,  8,  11.

1. Vehicle Brought to Workshop 
2. Check and Clear DTCs and Freeze Frame Data 

   HINT:

   See DTC CHECK / CLEAR  and FREEZE FRAME DATA  .

3. Problem Symptom Confirmation 

   Symptom does not occur:  Go to step  5

   Symptom occurs:  Go to step  6

4. Symptom Simulation 
5. DTC Check 

   HINT:

   See DTC CHECK / CLEAR  .

   There is no output:  Go to step  7

   There is output:  Go to step  8

6. Problem Symptoms Table 

   HINT:

   See PROBLEM SYMPTOMS TABLE  .

   Check for fluid leakage and  Go to step  10

7. DTC Chart 

   HINT:

   See DIAGNOSTIC TROUBLE CODE CHART  .

8. Circuit Inspection 
9. Identification of Problem 
10. Repair 
11. Confirmation Test 

    End