LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> Sienna LE, AWD >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Door Lock >> Power Door Lock Control System >> Data List / Active Test

Data List / Active Test

  1. READ DATA LIST 

    HINT:

    Using the intelligent tester's DATA LIST allows switch, actuator and other item values to be read without removing any parts. Reading the DATA LIST early in troubleshooting is one way to save time.

    1. Connect the intelligent tester with CAN VIM to the DLC3.
    2. Turn the ignition switch ON.
    3. Read the DATA LIST.

      BODY: 

      DATA LIST

      Item Measurement Item/Display (Range) Normal Condition
      KEY UNLK WRN SW Unlock warning switch signal / ON or OFF ON: Key is in ignition key cylinder
      OFF: No key is in ignition key cylinder
      IGSW Ignition switch signal / ON or OFF ON: Key is in ON or START position
      OFF: Key is in OFF or ACC position
      BACK DOR OPEN Back door open judgment / PROHIBIT or PERMIT PROHIBIT: Back door is in LOCK position (prohibited from being unlatched)
      PERMIT: Back door is in UNLOCK position (permitted to be unlatched)
      D DOR CTY SW Driver side door courtesy switch signal/ ON or OFF ON: Driver side door is open
      OFF: Driver side door is closed
      P DOR CYT SW Passenger side door courtesy switch signal / ON or OFF ON: Passenger side door is open
      OFF: Passenger side door is closed
      Rr DOR CTY SW Rear door courtesy switch signal / ON or OFF ON: Right or left rear door is open
      OFF: Right and left rear doors are closed
      P LOCK POS SW Passenger side door lock position switch signal / ON or OFF ON: Passenger side door lock is in UNLOCK position
      OFF: Passenger side door lock is in LOCK position
      Rr LOCK POS SW Rear door lock position switch signal / ON or OFF ON: Rear door lock is in UNLOCK position
      OFF: Rear door lock is in LOCK position
      B DOR OPEN SW Back door opener switch signal (Outside handle switch) / ON or OFF ON: Back door opener switch is pushed
      OFF: Back door opener switch is not pushed
      D LOCK POS SW Driver side door lock position switch signal / ON or OFF ON: Driver side door lock is in unlock position
      OFF: Driver side door lock is in lock position
      B DOE OPER SW Power back door MAIN switch signal / ON or OFF ON: Power back door MAIN switch is pushed
      OFF: Power back door MAIN switch is not pushed
      D PSD SW Power side door MAIN switch signal / ON or OFF ON: Power slide door MAIN switch is pushed
      OFF: Power slide door MAIN switch is not pushed
      AUTO LOCK DELAY Door courtesy switch signal / 30s or 60s 30s: Door auto locking time is 30 sec.
      60s: Door auto locking time is 60 sec.
      UNLOCK/2 OPER 2 times operation wireless unlock signal / ON or OFF ON: All doors unlock when wireless UNLOCK switch pressed twice
      OFF: All doors unlock when wireless UNLOCK switch pressed once
      AUTO LOCK Vehicle speed signal (approx. 20 km/h (13 mph))/ ON or OFF ON: Doors lock at a vehicle speed of 20 km/h (13 mph)
      OFF: Doors do not lock at a vehicle speed of 20 km/h (13 mph)
      UNLK/KEY TWICE Key operation driver door 2-step unlock switch signal / ON or OFF ON: All doors are unlocked when driver side door key cylinder is turned to unlock twice (2-step unlocking function)
      OFF: Only driver side door is unlocked when driver side door key cylinder is turned to unlock once
      ALL UNLK/OPN-CL Driver side door courtesy switch signal / ON or OFF ON: All doors unlock when driver side door is opened
      OFF: Other doors do not unlock when driver side door is opened
      UNLOCK/PARK Ignition switch ON, shift lever P position, vehicle speed 0 km/h signal / ON or OFF ON: All doors unlock when shift lever is shifted to P position from any position other than P while the ignition switch is ON
      OFF: No door unlocks even when shift lever is shifted to P position from any position other than P while ignition switch is ON
      AUTO LOCK/SHIFT Shift lever in any position other than P position signal / ON or OFF ON: All doors lock when shift lever is shifted to any position other than P from P position
      OFF: No door locks when shift lever is shifted to any position other than P from P position
  2. PERFORM ACTIVE TEST 

    HINT:

    Performing the intelligent tester's ACTIVE TEST allows relay, VSV, actuator, and other items to be operated without removing any parts. Performing the ACTIVE TEST early in troubleshooting is one way to save time.

    The DATA LIST can be displayed during the ACTIVE TEST.

    1. Connect the intelligent tester with CAN VIM to the DLC3.
    2. Turn the ignition switch ON.
    3. Perform the ACTIVE TEST.

      BODY: 

      ACTIVE TEST

      Item Test Details Diagnostic Note
      TRUNK/BDOR OPEN Operate back door open OFF/ON -
      DOOR LOCK Operate door lock motor for all doors OFF/ LOCK/UNLOCK All doors are closed