LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> Sienna CE >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - System And Circuit Testing, On-Vehicle Inspection, Removal, Inspection & Installation >> EFI Relay >> Inspection

EFI Relay: Inspection

  1. INSPECT EFI RELAY 
    1. Using an ohmmeter, measure the resistance according to the value (s) in the table below.

      Standard resistance 

      STANDARD RESISTANCE SPECIFICATIONS

      Tester Connection Specified Condition
      3 - 5 10 kΩ or higher
      3 - 5 Below 1 Ω (Apply battery voltage between terminals 1 and 2)

      If the result is not as specified, replace the relay.

      Fig 1: Inspecting EFI Relay
      G04942983Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals