LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> Sienna CE >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - System And Circuit Testing, On-Vehicle Inspection, Removal, Inspection & Installation >> Accelerator Pedal Rod >> Removal

Accelerator Pedal Rod: Removal

  1. REMOVE ACCELERATOR PEDAL ROD 
    1. Disconnect the accelerator pedal position sensor connector.
    2. Remove the 2 nuts and accelerator pedal rod.
      Fig 1: Locating Nuts On Accelerator Pedal Rod
      G05136385Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals