LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> Sienna CE >> Repair and Diagnosis >> Body & Frame >> Mirrors >> Mirror >> Outer Rear View Mirror >> Inspection

Outer Rear View Mirror: Inspection

  1. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY LH (w/o Memory) 
    1. Disconnect the mirror connector.
      1. Check operation of the outer mirror.
      2. Apply battery voltage and inspect operation of the mirror face, as shown in the table and illustration.

        Standard (LH) 

        MEASUREMENT CONDITION

        Symbols (Measurement Condition) Mirror Operation
        Battery positive (+) → MV (6)
        Battery negative (-) → M+ (7)        		 Turns upward (A)
        Battery positive (+) → M+ (7)
        Battery negative (-) → MV (6)        		 Turns downward (B)
        Battery positive (+) → M+ (7)
        Battery negative (-) → MH (8)        		 Turns left (C)
        Battery positive (+) → MH (8)
        Battery negative (-) → M+ (7)        		 Turns right (D)

        If the result is not as specified, replace the mirror assembly.

        Fig 1: Inspecting Outer Rear View Mirror Assembly LH (W/O Memory)
        G05141748Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY RH (w/o Memory) 
    1. Disconnect the mirror connector.
    2. Check operation of the outer mirror.
      1. Apply battery voltage and inspect operation of the mirror face, as shown in the table and illustration.

        Standard (RH) 

        MEASUREMENT CONDITION

        Symbols (Measurement Condition) Mirror Operation
        Battery positive (+) → MV (6)
        Battery negative (-) → M+ (7)        		 Turns upward (A)
        Battery positive (+) → M+ (7)
        Battery negative (-) → MV (6)        		 Turns downward (B)
        Battery positive (+) → M+ (7)
        Battery negative (-) → MH (8)        		 Turns right (D)
        Battery positive (+) → MH (8)
        Battery negative (-) → M+ (7)        		 Turns left (C)

        If the result is not as specified, replace the mirror assembly.

        Fig 2: Inspecting Outer Rear View Mirror Assembly RH (W/O Memory)
        G05141749Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY LH (w/ Memory) 
    1. Disconnect the mirror connector.
    2. Check operation of the outer mirror.
      1. Apply battery voltage and inspect operation of the mirror face, as shown in the table and illustration.

        Standard (LH) 

        MEASUREMENT CONDITION

        Symbols (Measurement Condition) Mirror Operation
        Battery positive (+) → MV(10)
        Battery negative (-) → M+ (11)        		 Turns upward (A)
        Battery positive (+) → M+(11)
        Battery negative (-) → MV (10)        		 Turns downward (B)
        Battery positive (+) → MH (12)
        Battery negative (-) → M+ (11)        		 Turns left (C)
        Battery positive (+) → M+ (11)
        Battery negative (-) → MH (12)        		 Turns right (D)

        If the result is not as specified, replace the mirror assembly.

        Fig 3: Inspecting Outer Rear View Mirror Assembly LH (W/ Memory)
        G05141750Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Check operation of the EC mirror.
      1. Apply battery voltage and inspect operation of the mirror face, as shown in the table and illustration.

        Standard (LH) 

        MEASUREMENT CONDITION

        Symbols (Measurement Condition) Mirror Operation
        Battery positive (+) → EC+ (14)
        Battery negative (-) → EC- (13)        		 Mirror surface changes to dark

        If the result is not as specified, replace the mirror assembly.

        Fig 4: Identifying EC Mirror Connector Terminals
        G05141751Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Check of the retract function.
      1. Apply battery voltage and inspect operation of the mirror, as shown in the table and illustration.

        Standard (LH) 

        MEASUREMENT CONDITION

        Measurement Condition Mirror Operation
        Battery positive (+) → (3)
        Battery negative (-) → (4)        		 Retract position (Fold)
        Battery positive (+) → (4)
        Battery negative (-) → (3)        		 Driving position (Unfold)

        If the result is not as specified, replace the mirror assembly.

      Fig 5: Identifying Mirror Connector Terminals
      G05141752Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY RH (w/ Memory) 
    1. Disconnect the mirror connector.
    2. Check operation of the outer mirror.
      1. Apply battery voltage and inspect operation of the mirror face, as shown in the table and illustration.

        Standard (RH) 

        MEASUREMENT CONDITION

        Symbols (Measurement Condition) Mirror Operation
        Battery positive (+) → MV (10)
        Battery negative (-) → M+ (11)        		 Turns upward (A)
        Battery positive (+) → M+ (11)
        Battery negative (-) → MV (10)        		 Turns downward (B)
        Battery positive (+) → MH (12)
        Battery negative (-) → M+ (11)        		 Turns left (C)
        Battery positive (+) → M+ (11)
        Battery negative (-) → MH (12)        		 Turns right (D)

        If the result is not as specified, replace the mirror assembly.

        Fig 6: Checking Operation Of Outer Mirror
        G05141753Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Check operation of the EC mirror.
      1. Apply battery voltage and inspect operation of the mirror face, as shown in the table and illustration.

        Standard (RH) 

        MEASUREMENT CONDITION

        Symbols (Measurement Condition) Mirror Operation
        Battery positive (+) → EC+ (14)
        Battery negative (-) → EC- (13)        		 Mirror surface changes to dark

        If the result is not as specified, replace the mirror assembly.

        Fig 7: Checking Operation Of EC Mirror
        G05141754Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Check of the retract function.
      1. Apply battery voltage and inspect operation of the mirror, as shown in the table and illustration.

        Standard (RH) 

        MEASUREMENT CONDITION

        Measurement Condition Mirror Operation
        Battery positive (+) → (3)
        Battery negative (-) → (4)        		 Retract position (Fold)
        Battery positive (+) → (4)
        Battery negative (-) → (3)        		 Driving position (Unfold)

        If the result is not as specified, replace the mirror assembly.

        Fig 8: Identifying Mirror Connector Terminals
        G05141752Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals