LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> Sequoia SR5, 4WD >> Repair and Diagnosis >> Engine Performance >> Engine Control System (2UZ-FE) >> Crankshaft Position Sensor >> Removal

Crankshaft Position Sensor: Removal

  1. REMOVE ENGINE UNDER COVER NO.1 
  2. REMOVE CRANKSHAFT POSITION SENSOR 
    1. Disconnect the crankshaft position sensor connector.
    2. Remove the bolt and crankshaft position sensor.
scientia non olet · About LEMON Manuals