Charging System: Generator: Replacement

REPLACE FRONT BEARING
1. Remove the 4 screws, the bearing retainer and the bearing.
  
  Fig 1: Removing Screws, Bearing Retainer & Bearing
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Using SST and a hammer, tap out the bearing.
  SST 09950-60010 (09951-00250), 09950-70010 (09951-07100)
  
  Fig 2: Tapping Out Bearing Using SST & Hammer
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Using SST and a press, press in a new bearing.
  SST 09950-60010 (09951-00470), 09950-70010 (09951-07100)
4. Install the bearing retainer with the 4 screws.
  Torque: 2.6 N*m (27 kgf*cm, 23 in.*lbf)
  
  Fig 3: Pressing New Bearing Using SST & a Press
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REPLACE REAR BEARING
1. Using SST, remove the bearing cover (outside) and the bearing.
  SST 09820-00021
  
  NOTE: Be careful not to damage the fan.
  
  Fig 4: Removing Bearing Cover (Outside) And Bearing
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Using SST and a press, press in a new bearing.
  SST 09820-00031
  
  Fig 5: Pressing New Bearing Using SST & A Press
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Using SST, push in the bearing cover (outside).
  SST 09285-76010
  
  Fig 6: Push In Bearing Cover (Outside) Using SST
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002