Torque Specifications
POWER STEERING - TORQUE SPECIFICATIONS
| Part tightened | N*m | kgf*cm | ft.*lbf | |
|---|---|---|---|---|
| PS VANE PUMP | ||||
| Union bolt x Pressure feed tube | 46.5 | 475 | 34 | |
| PS vane pump assembly set stud bolt | 22 | 220 | 16 | |
| PS vane pump assembly set bolt and nut | 44 | 450 | 33 | |
| Suction port union set bolt | 13 | 130 | 9 | |
| Pressure port union | 83 | 850 | 61 | |
| Front housing x Rear housing | 24 | 240 | 17 | |
| PS GEAR | ||||
| Turn pressure tube union nut | 13 (15) | 135 (150) | 10 (11) | |
| Tie rod end lock nut | 55 | 560 | 41 | |
| Rack x Rack end | 76 (103) | 770 (1,050) | 56 (76) | |
| Rack guide spring cap lock nut | 44 (59) | 450 (600) | 32 (43) | |
| Rack housing cap | 59 | 600 | 43 | |
| Self-locking nut | 25 | 250 | 18 | |
| Control valve housing set bolt | 18 | 185 | 13 | |
| PS gear assembly set bolt | 165 | 1,700 | 123 | |
| PS gear assembly set bolt and nut | 130 | 1,350 | 96 | |
| Bracket x Body | Bolt and nut | 165 | 1,700 | 123 |
| Bracket x Body | Stud bolt | 20 | 200 | 15 |
| Pressure feed and return tubes x Control valve housing | 22 (25) | 227 (250) | 16 (18) | |
| No. 2 intermediate shaft assembly x No. 2 universal joint assembly | 35 | 360 | 26 | |
| Control valve shaft x No. 2 intermediate shaft assembly | 35 | 360 | 26 | |
| Tie rod end x Lower arm | 91 | 930 | 67 | |
( ): For use without SST