Torque Specifications
2UZ-FE CHARGING - TORQUE SPECIFICATIONS
| Part tightened | N*m | kgf*cm | ft.*lbf | |
|---|---|---|---|---|
| Bearing retainer x Drive end frame | 2.6 | 27 | 23 in.*lbf | |
| Rectifier end frame x Drive end frame | 5.8 | 59 | 51 in.*lbf | |
| Generator pulley x Rotor | 110.3 | 1,125 | 81 | |
| Brush holder x Rectifier end frame | 1.8 | 18 | 16 in.*lbf | |
| Rear end cover x Rectifier end frame | 4.6 | 47 | 41 in.*lbf | |
| Generator x Cylinder block | Bolt | 39 | 400 | 29 |
| Nut 10 mm | 39 | 400 | 29 | |
| Nut 8 mm | 15.5 | 158 | 11 | |