LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> Sequoia Limited, RWD >> Repair and Diagnosis >> Engine Performance >> Engine Control System (2UZ-FE) >> Throttle Body >> Removal

Throttle Body: Removal

  1. REMOVE THROTTLE BODY COVER 
  2. DRAIN ENGINE COOLANT 
  3. REMOVE INTAKE AIR CONNECTOR 
  4. REMOVE THROTTLE BODY 
    1. Disconnect the throttle control connector.
    2. Disconnect the 2 water bypass hoses from the throttle body.
      Fig 1: Locating Water Bypass Hoses From Throttle Body
      G05190658Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Remove the nut and 3 bolts, and remove the throttle body from the intake manifold.
      Fig 2: Locating Throttle Body From Intake Manifold With Bolts
      G05190659Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals