LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> Sequoia Limited, RWD >> Repair and Diagnosis >> Electrical >> Charging Systems >> Charging System >> Generator >> Removal

Charging System: Generator: Removal

  1. REMOVE ENGINE UNDER COVER NO.1 
  2. REMOVE THROTTLE BODY COVER 
  3. DISCONNECT CABLE FROM NEGATIVE (-) BATTERY TERMINAL 
  4. DISCONNECT INTAKE AIR CONNECTOR FROM THROTTLE BODY 
  5. REMOVE DRIVE BELT 
    1. Loosen the belt tension by turning the belt tensioner counterclockwise, and remove the drive belt.

      HINT:

      The pulley bolt for the belt tensioner has a left hand thread.

      Fig 1: Loosening Belt Tension By Turning Belt Tensioner Counterclockwise
      G04507738Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. REMOVE PS VANE PUMP FROM ENGINE 

    (See REMOVAL )

  7. REMOVE GENERATOR 
    1. Disconnect the generator connector.
    2. Remove the terminal cap and nut, and disconnect the generator wire.
    3. Disconnect the wire clamp from the cord clip on the generator.
    4. Remove the bolt, the 2 nuts and the generator.
scientia non olet · About LEMON Manuals