Mass Air Flow Meter: Installation: Installation
WARNING: This page is about a different car, the 2009 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
- INSTALL MASS AIR FLOW METER
- Install the MAF meter with the 2 screws.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Torque: 1.0 N*m ( 10 kgf*cm, 9 in.*lbf)
NOTE:Make sure that the O-ring is not pinched.
- Connect the MAF meter connector.
- Install the MAF meter with the 2 screws.
- INSTALL ENGINE ROOM SIDE COVER RH . Refer to INSTALLATION - Step 92
- INSTALL COOL AIR INTAKE DUCT SEAL . Refer to INSTALLATION - Step 94
- INSTALL V-BANK COVER SUB-ASSEMBLY . Refer to INSTALLATION - Step 95