LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> RAV4 Base, 2.4 D, FWD >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Supplemental Restraint System >> Occupant Classification System >> DTC Check / Clear

DTC Check / Clear

  1. CHECK DTC 

    HINT:

    • When DTC B1650/23 is detected as a result of troubleshooting for the airbag system, troubleshoot the occupant classification system.
    • Use the intelligent tester (with CAN VIM) to read and clear DTCs, otherwise the DTCs cannot be read and cleared.
    1. Connect the intelligent tester (with CAN VIM) to the DLC3.
    2. Turn the ignition switch ON.
    3. Check for DTCs by following the prompts on the tester screen.

      HINT:

      Refer to the intelligent tester operator's manual for further details.

  2. Clear DTC 
    1. Connect the intelligent tester (with CAN VIM) to the DLC3.
    2. Turn the ignition switch ON.
    3. Clear the DTCs by following the prompts on the tester screen.

      HINT:

      Refer to the intelligent tester operator's manual for further details.

    Fig 1: Connecting Intelligent Tester (With CAN VIM) To DLC3
    G05184544Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals