How To Proceed With Troubleshooting

HINT:

• Use the procedure to troubleshoot the power door lock control system.
• *: Use the Intelligent tester.

1. VEHICLE BROUGHT TO WORKSHOP 
2. INSPECT BATTERY VOLTAGE 

   Standard voltage: 11 to 14 V 

   If the voltage is below 11 V, recharge or replace the battery before proceeding.

3. PROBLEM SYMPTOMS TABLE 

   Result 

   RESULT REFERENCE
   
   

   Result	Proceed to
   Fault is not listed in problem symptoms table	A
   Fault is listed on problem symptoms table	B

   B: Go to step   5 

   A: Go TO NEXT STEP. 

4. OVERALL ANALYSIS AND TROUBLESHOOTING* 
   1. OPERATION CHECK  .
   2. TERMINALS OF ECU  .
   3. DATA LIST / ACTIVE TEST  .
5. ADJUST, REPAIR OR REPLACE 
6. CONFIRMATION TEST 

   END