Stereo Component Amplifier: Installation
- INSTALL STEREO COMPONENT AMPLIFIER ASSEMBLY
- Install the stereo component amplifier with the 3 bolts.
- Connect the connectors.
- INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH (w/ Rear No. 2 Seat)
(see INSTALLATION
)
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH (w/o Rear No. 2 Seat)
(see INSTALLATION
)
- INSTALL TETHER ANCHOR BRACKET SUB-ASSEMBLY (w/o Rear No. 2 Seat)
(see INSTALLATION
)
- INSTALL RECLINING REMOTE CONTROL LEVER BEZEL RH (w/o Rear No. 2 Seat)
(see INSTALLATION
)
- INSTALL REAR DECK TRIM COVER RH (w/ Rear No. 2 Seat)
(see INSTALLATION
)
- INSTALL REAR FLOOR FINISH PLATE
(see INSTALLATION
)
- INSTALL BACK DOOR WEATHERSTRIP
- INSTALL REAR FLOOR NO. 1 MAT SUPPORT SIDE PLATE
(see INSTALLATION
)
- INSTALL REAR FLOOR NO. 2 BOARD
- INSTALL REAR FLOOR NO. 3 BOARD
- INSTALL REAR NO. 2 SEAT ASSEMBLY RH (w/ Rear No. 2 Seat)
(see INSTALLATION
)
- INSTALL REAR NO. 2 SEAT ASSEMBLY LH (w/ Rear No. 2 Seat)
(see INSTALLATION
)
- INSTALL NO. 2 SEAT LEG COVER RH (w/ Rear No. 2 Seat)
(see INSTALLATION
)
- INSTALL NO. 2 SEAT LEG COVER LH (w/ Rear No. 2 Seat)
(see INSTALLATION
)
- INSTALL NO. 2 SEAT HINGE COVER RH (w/ Rear No. 2 Seat)
(see INSTALLATION
)
- INSTALL NO. 2 SEAT HINGE COVER LH (w/ Rear No. 2 Seat)
(see INSTALLATION
)
- INSTALL DECK BOARD ASSEMBLY (w/o Rear No. 2 Seat)
- INSTALL REAR FLOOR NO. 1 BOARD (w/o Rear No. 2 Seat)
- INSTALL TONNEAU COVER ASSEMBLY (w/o Rear No. 2 Seat)
- INSTALL PACKAGE TRAY TRIM POCKET SUB-ASSEMBLY (w/o Rear No. 2 Seat)
- INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH
- INSTALL REAR DOOR SCUFF PLATE RH
(see INSTALLATION
)
- CONNECT CABLE TO NEGATIVE BATTERY TERMINAL