Steering Pad Switch: Removal
- DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
- REMOVE STEERING PAD ASSEMBLY (See INSTALLATION )
- REMOVE STEERING PAD SWITCH ASSEMBLY (w/o Telephone Microphone)
- Disconnect the connectors.
- Remove the screw.
- Detach the claw and remove the steering pad switch assembly.
- REMOVE STEERING PAD SWITCH ASSEMBLY (w/ Telephone Microphone)
- Disconnect the connectors.
- Remove the 2 screws.
- Detach the 2 claws and remove the steering pad switch assembly.