Radio Receiver: Removal

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL CENTER (see REMOVAL )
REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL CENTER (see REMOVAL )
REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET
1. Remove the 4 bolts.
2. Detach the 4 claws.
3. Disconnect all the connectors and remove the radio receiver with bracket.
  
  Fig 1: Identifying Claws And Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Remove the 4 bolts and No. 1 radio bracket from the radio receiver.
  
  Fig 2: Locating No. 1 Radio Bracket Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
5. Remove the 4 bolts and No. 2 radio bracket from the radio receiver.
Fig 3: Locating No. 2 Radio Bracket Bolts
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002