LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> Prius Base >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Supplemental Restraint System >> Seat Position Sensor >> On-Vehicle Inspection

On-Vehicle Inspection

  1. CHECK SEAT POSITION SENSOR (VEHICLE NOT INVOLVED IN COLLISION) 
    1. Perform a diagnostic system check (see DTC CHECK / CLEAR  ).
  2. CHECK SEAT POSITION SENSOR (VEHICLE INVOLVED IN COLLISION) 
    1. Perform a diagnostic system check (see DTC CHECK / CLEAR  ).
    2. Even if the airbag was not deployed, check if there is any damage to the seat position sensor.

      If there are any defects as mentioned below, replace the seat position sensor with a new one:

      • Cracks, dents or chips on the sensor housing.
      • Cracks or other damage to the connector.
      CAUTION: For removal and installation of the seat position sensor, be sure to follow the correct procedures.
scientia non olet · About LEMON Manuals