How To Proceed With Troubleshooting

HINT:

• Use the following procedures to troubleshoot the occupant classification system.
• *: Use the intelligent tester.

1. VEHICLE BROUGHT TO WORKSHOP 
2. PASSENGER AIRBAG ON/OFF INDICATOR CHECK 
3. DTC CHECK (Present and Past DTC)* 
   1. Check for DTCs (see DTC CHECK / CLEAR  ).

      Result 

      RESULT
      
      

      Result	Proceed to
      DTC is output.	A
      DTC is not output.	B

   B: Go to PROBLEM SYMPTOMS TABLE 

   A: Go to Next Step 

4. DTC CHART 
5. REPAIR OR REPLACEMENT 
6. DTC CLEARANCE (Present and Past DTCs)* 
   1. Clear the DTCs (see DTC CHECK / CLEAR  ).
7. DTC CHECK (Present and Past DTCs)* 
   1. Check for DTCs (see DTC CHECK / CLEAR  ).

      Result 

      RESULT
      
      

      Result	Proceed to
      DTC Is not output.	A
      DTC is output.	B

   B: Go to step  5

   A: Go to Next Step 

8. PROBLEM SYMPTOMS SIMULATION 
   1. Check the passenger airbag ON/OFF indicator condition (see DIAGNOSIS SYSTEM  ).

      Result 

      RESULT
      
      

      Result	Proceed to
      Passenger airbag ON/OFF indicator is operating normally.	A
      Passenger airbag ON/OFF indicator (OFF) is not operating normally.	B

   B: Go to step  5

   A: Go to Next Step 

9. CONFIRMATION TEST 

   NEXT: END