Data List / Active Test

HINT:

Using the intelligent tester's DATA LIST allows switch, actuator and other item values to be read without removing any parts. Reading the DATA LIST early in troubleshooting is one way to save time.

1. Connect the intelligent tester (with CAN VIN) to the DCL3.
2. Turn the power switch ON (IG).
3. Read the DATA LIST according to the display on the tester.

   Transponder key ECU 

   CERTIFICATION ECU DATA LIST
   
   

   Item	Measurement Item / Display (Range)	Normal Condition	Diagnostic Note
   KEY UNLK WRN SW	Halfway switch signal/ON or OFF	ON: Key is in key slot. OFF: No key is in key slot.	-

   Body ECU 

   BODY ECU DATA LIST
   
   

   Iltem	Measurement Item / Display (Range)	Normal Condition	Diagnostic Note
   D DOR CTY SW	Driver side door courtesy switch signal / ON or OFF	ON: Driver side door is open. OFF: Driver side door is closed.	-