Navigation Ecu: Removal

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
REMOVE FRONT SEAT ASSEMBLY LH (See REMOVAL )
REMOVE NAVIGATION ECU COVER
1. Detach the 2 clips and remove the navigation ECU cover.
REMOVE NAVIGATION ECU WITH BRACKET
1. Disconnect the connector.
  
  Fig 1: Installing Cover And Attach 2 Clips
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the 3 bolts and navigation ECU with bracket.
  
  Fig 2: Installing Navigation ECU With 3 Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE NO. 1 DISC PLAYER BRACKET
1. Remove the 2 bolts and disc player bracket.
  
  Fig 3: Installing Bracket With 2 Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE NO. 2 DISC PLAYER BRACKET
1. Remove the 2 bolts and No. 2 disc player bracket.
  
  Fig 4: Installing Bracket With 2 Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002