Fog Light Assembly: Installation

HINT:

• Use the same procedures for the RH and LH sides.
• The procedures listed below are for the LH side.

1. INSTALL FOG LIGHT UNIT LH 
   1. Install the fog light bulb to the fog light unit.
   2. Attach the 3 claws to install the light unit.
   Fig 1: Installing Fog Light Unit LH

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. INSTALL RADIATOR GRILLE LOWER LH (See  REASSEMBLY  ) 
3. INSTALL FRONT BUMPER COVER (See  REASSEMBLY  ) 
4. INSTALL FRONT FENDER LINER RH (See  INSTALLATION  ) 
5. INSTALL FRONT FENDER LINER LH (See  INSTALLATION  ) 
6. ADJUST FOG LIGHT AIMING (See  ADJUSTMENT  ) 
7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
8. PERFORM INITIALIZATION 
   1. Perform initialization (see INITIALIZATION ).
      NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.