LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> Prius Base >> Repair and Diagnosis >> Accessories & Equipment >> Entertainment Systems >> Audio System & Visual System >> Network Gateway Ecu >> Removal

Network Gateway Ecu: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
  2. REMOVE INSTRUMENT PANEL SUB-ASSEMBLY 
    1. Remove the instrument panel (See REMOVAL ) .
  3. REMOVE NETWORK GATEWAY ECU 
    1. Disconnect the connector.
    2. Remove the bolt and network gateway ECU.
      Fig 1: Locating Network Gateway ECU Bolt
      G05189941Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals