Ignition Switch: Removal

DISCONNECT BATTERY NEGATIVE TERMINAL
REMOVE STEERING COLUMN COVER LWR
1. Remove the 3 screws, then remove the steering column cover LWR.
  
  Fig 1: Identifying Steering Column Cover LWR Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE IGNITION OR STARTER SWITCH ASSEMBLY
1. Disconnect the ignition switch connector and unlock warning switch connector.
  
  Fig 2: Locating Ignition Switch And Unlocking Warning Switch Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Disconnect the unlock warning switch connector from the ignition switch assembly.
  
  Fig 3: Locating Warning Switch Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Disconnect the wire harness from the steering assembly.
  
  Fig 4: Locating Wire Harness On Steering Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Remove the 2 screws, then remove the ignition switch assembly.
  
  Fig 5: Locating Ignition Switch Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002