LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> Matrix Base, Standard >> Repair and Diagnosis >> Brakes >> Traction Control >> Brakes - Abs >> Yaw Rate And Acceleration Sensor >> Removal

Yaw Rate And Acceleration Sensor: Removal

NOTE:
  • Do not use the dropped or damaged yaw rate sensor.
  • Keep foreign matter from adhering to the area between the yaw rate sensor bracket and body.
  1. REMOVE FRONT SEAT ASSEMBLY LH (See  REMOVAL  ) 
  2. REMOVE YAW RATE SENSOR BRACKET 
    1. Remove the bolt and yaw rate sensor bracket.
      Fig 1: Locating Yaw Rate Sensor Bracket Bolt
      G05194997Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE YAW RATE SENSOR ASSEMBLY 
    1. Disconnect the connector from the yaw rate sensor assembly.
    2. Remove the 2 bolts and yaw rate sensor assembly.
      NOTE: Do not remove the installation nuts.
      Fig 2: Locating Yaw Rate Sensor Assembly Bolts
      G05194998Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals