LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> Matrix Base, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Lighting System >> Personal Light Assembly >> Inspection

Personal Light Assembly: Inspection

  1. INSPECT PERSONAL LIGHT ASSEMBLY 
    1. Measure the resistance according to the value(s) in the table below.

      Standard resistance 

      RESISTANCE SPECIFICATION

      Tester connection Switch operation Specified resistance
      1 - 3 OFF 10 kΩ or higher
      Fig 1: Identifying (M3) Personal Light Assembly Connector Terminals
      G05236875Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Connect the positive (+) lead from the battery to terminal 1 and the negative (-) lead to terminal 3, then check that the illumination comes on when switch operation is ON position.
  2. INSPECT PERSONAL LIGHT ASSEMBLY (ELECTRO CHROMIC MIRROR INNER MIRROR) 
    1. Measure the resistance according to the value(s) in the table below.

      Standard resistance 

      RESISTANCE SPECIFICATION

      Tester connection Switch operation Specified resistance
      1 - 6 OFF 10 kΩ or higher
    2. Connect the positive (+) lead from the battery to terminal 1 and the negative (-) lead to terminal 6, then check that the illumination comes on when switch operation is ON position.
      Fig 2: Identifying (I13) Personal Light Assembly (Electro Chromic Mirror Inner Mirror) Connector Terminals
      G05236876Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals