LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> Matrix Base, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Lighting System >> Back-Up Light Switch >> Inspection

Back-Up Light Switch: Inspection

  1. INSPECT BACK-UP LIGHT SWITCH ASSEMBLY 
    1. Remove the back-up light switch.
    2. Measure the resistance according to the value(s) in the table below.

      Standard resistance 

      RESISTANCE SPECIFICATION

      Tester connection Switch operation Specified condition
      1 - 2 Switch ON (Ball is not pressed) 10 kΩ or higher
      1 - 2 Switch OFF (Ball is pressed) Below 1 Ω

      If the result is not as specified, replace the back-up light switch.

scientia non olet · About LEMON Manuals