LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> Matrix Base, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - A246E >> Second Coast Brake >> Reassembly

Second Coast Brake: Reassembly

  1. INSTALL 2ND COAST BRAKE PISTON ROD 
    1. Install the 2nd coast brake piston plate washer and 2nd coast brake piston compression spring to the 2nd coast brake piston rod.
    2. Install the 2nd coast brake piston.
      Fig 1: Identifying 2nd Coast Brake Piston And 2nd Coast Brake Piston Plate Washer
      G05194009Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Install an E-ring with needle-nose pliers while pushing the 2nd coast brake piston.
      Fig 2: Installing E-Ring
      G05194012Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL 2ND COAST BRAKE PISTON OIL SEAL RING 
    1. Coat the 2nd coast brake piston oil seal ring with ATF and install the 2nd coast brake piston oil seal ring to the 2nd coast brake piston assembly.
      NOTE: Do not spread the ring ends more than necessary.
      Fig 3: Installing 2nd Coast Brake Piston Oil Seal Ring
      G05194013Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals