LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> Matrix Base, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - A246E >> Park/ Neutral Position Switch >> Removal

Park/ Neutral Position Switch: Removal

  1. REMOVE BATTERY 
  2. REMOVE BATTERY CARRIER 
    1. Remove the 4 bolts and battery carrier.
  3. DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY 
    1. Remove the nut from the control shaft lever.
    2. Disconnect the control cable from the control shaft lever.
      Fig 1: Locating Battery Carrier Bolts
      G05194247Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Remove the clip and disconnect the control cable from the bracket.
      Fig 2: Identifying Transmission Control Cable Assembly
      G05193576Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY 
    1. Disconnect the park/neutral position switch connector.
    2. Remove the nut, washer and control shaft lever.
    3. Pry out the lock plate and remove the manual valve shaft nut.
    4. Remove the 2 bolts and pull out the park/neutral position switch.
      Fig 3: Locating Park/Neutral Position Switch Bolts
      G05193577Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals