Shift And Select Lever Shaft: Disassembly

WARNING: This page is about a different variant/trim than selected.

REMOVE CONTROL SHIFT LEVER BUSH
1. Remove the control shift lever bush from the selecting bellcrank assembly.
  
  Fig 1: Locating Control Shift Lever Bush
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE SELECTING BELLCRANK DUST COVER NO. 1
1. Remove the selecting bellcrank dust cover No. 1 from the selecting bellcrank assembly.
  
  Fig 2: Removing Selecting Bellcrank Dust Cover No.1
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE SELECTING BELLCRANK NO. 2
1. Remove the nut, spring washer and selecting bellcrank No. 2 plate washer.
2. Remove the selecting bellcrank No. 2 from the selecting bellcrank support.
  
  Fig 3: Removing Selecting Bellcrank No.2
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE SELECTING BELLCRANK DUST COVER NO. 2
1. Remove the selecting bellcrank dust cover No. 2 from the selecting bellcrank No. 2.
  
  Fig 4: Identifying Selecting Bellcrank Dust Cover No. 2
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE SELECTING BELLCRANK NO. 2 BUSH
1. Remove the 2 selecting bellcrank No. 2 bushes from the selecting bellcrank No. 2.
  
  Fig 5: Removing Selecting Bellcrank No.2 Bush
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE SELECT SPRING SEAT NO. 2
1. Using a screwdriver, remove the E-ring, select spring seat No. 2 and select return spring No. 2 from the shift and select lever shaft.
  
  Fig 6: Removing Select Spring Seat No.2
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE SHIFT LEVER INNER NO. 2
1. Using a pin punch (ø 5 mm) and a hammer, remove the slotted spring pin and shift lever inner No. 2 from the shift and select lever shaft.
  HINT:
  
  Make sure the orientation of the shift lever inner No. 2.
  
  Fig 7: Removing Shift Lever Inner No.2
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE SHIFT LEVER INNER NO. 1
1. Using a pin punch (ø 5 mm) and a hammer, remove the slotted spring pin, shift lever inner No. 1 and shift inter lock plate from the shift and select lever shaft.
  HINT:
  
  Make sure the orientation of the shift lever inner No. 1.
  
  Fig 8: Removing Shift Lever Inner No.1
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE SELECT INNER LEVER
1. Using a pin punch (ø 5 mm) and a hammer, remove the slotted spring pin, select inner lever, select return spring No. 1 and select return spring seat No. 1.
  HINT:
  
  Make sure the orientation of the select inner lever.
  
  Fig 9: Removing Select Inner Lever
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE CONTROL SHAFT COVER
1. Using 2 screwdrivers and a hammer, tap out the snap ring.
  HINT:
  
  Use a shop rag to keep the snap ring from flying.
2. Remove the control shaft cover and shift and select lever shaft dust boot.
  
  Fig 10: Removing Control Shaft Cover
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE CONTROL SHAFT COVER OIL SEAL
1. Using a screwdriver, remove the control shaft cover oil seal from the control shaft cover.
  
  Fig 11: Removing Control Shaft Cover Oil Seal
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002