LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> Matrix Base, Automatic >> Repair and Diagnosis >> Drivelines & Axles >> Wheel Hubs >> Axle >> Rear Axle Hub >> Removal

Rear Axle Hub: Removal

  1. REMOVE REAR WHEEL 
  2. SEPARATE REAR DISC BRAKE CALIPER ASSEMBLY LH (DISC REAR BRAKE TYPE) 
    1. Remove the 2 bolts, separate the rear disc brake caliper assembly LH.
      Fig 1: Locating Rear Disc Brake Caliper Assembly LH Bolts
      G05234957Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE REAR DISC (DISC REAR BRAKE TYPE) 
  4. REMOVE REAR BRAKE DRUM SUB-ASSEMBLY (DRUM REAR BRAKE TYPE) 
  5. DISCONNECT SKID CONTROL SENSOR WIRE (WITH ABS) 
  6. REMOVE REAR AXLE HUB & BEARING ASSEMBLY LH 
    1. Remove the 4 bolts and hub & bearing assembly LH.
      Fig 2: Locating Rear Axle Hub & Bearing Assembly LH Bolts
      G05194615Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals