Rear Axle Hub Bolt: Installation

INSTALL REAR AXLE LH HUB BOLT
1. Install a washer and nut to a new LH hub bolt as shown in the illustration.
2. Using a hammer handle or an equivalent to hold the hub & bearing assembly, install the LH hub bolt by tightening the nut.
Fig 1: Installing Rear Axle LH Hub Bolt
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL REAR BRAKE DRUM SUB-ASSEMBLY (for Rear Drum Brake)
INSTALL REAR DISC (DISC REAR RAKE TYPE) (See INSTALLATION )
INSTALL REAR DISC BRAKE CALIPER ASSEMBLY LH (DISC REAR BRAKE TYPE) (See INSTALLATION )
INSTALL REAR WHEEL
Torque: 103 N*m (1,050 kgf*cm, 76 ft.*lbf)