LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> Matrix Base, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System & Washer System >> Front Wiper Motor >> Removal

Front Wiper Motor: Removal

  1. REMOVE WINDSHIELD WIPER ARM COVER 
  2. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH 
    1. Stop the windshield wiper motor assembly at the automatic stop position.
    2. Remove the nut and the FR wiper arm & blade assembly RH.
  3. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH 
    1. Remove the nut and the FR wiper arm & blade assembly LH.
  4. REMOVE HOOD TO COWL TOP SEAL 
    1. Using a clip remover, disengage the meshing of 8 clips and remove the hood to cowl top seal.
      Fig 1: Identifying Cowl Top Seal Clips
      G05195993Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. REMOVE COWL TOP VENTILATOR LOUVER RH 
    1. Remove the clip.
    2. Disengage the 5 claws and remove the cowl top ventilator louver RH.
      Fig 2: Identifying Cowl Top Ventilator Louver Claws RH
      G05195994Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. REMOVE COWL TOP VENTILATOR LOUVER LH 
    1. Remove the clip.
    2. Disengage the 5 claws and remove the cowl top ventilator louver LH.
      Fig 3: Identifying Cowl Top Ventilator Louver Claws LH
      G05195995Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  7. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY 
    1. Disconnect the connector.
    2. Remove the 2 bolts.
    3. Slide the wiper link assembly to the passenger's side. Disengage the meshing of the rubber pin and remove the windshield wiper motor and link assembly.
      Fig 4: Removing Windshield Wiper Motor And Link Assembly
      G05195996Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  8. REMOVE WINDSHIELD WIPER MOTOR ASSEMBLY 
    1. Using a screwdriver, and disengage the meshing of rod at the crank arm pivot of the windshield wiper motor assembly.
      Fig 5: Disengaging Meshing Of Rod At Crank Arm Pivot Of Windshield Wiper Motor Assembly
      G05236902Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Using a screwdriver, and disengage the meshing of rod at the crank arm pivot of the windshield wiper motor assembly.
      Fig 6: Disengaging Meshing Of Rod At Crank Arm Pivot Of Windshield Wiper Motor Assembly
      G05195998Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Using a Torx socket wrench, remove the 2 Torx bolts and the windshield wiper motor assembly.
      Fig 7: Locating Bolts
      G05195999Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals