LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> Land Cruiser >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Suspension System >> Front Shock Absorber >> Disposal

Front Shock Absorber: Disposal

  1. DISPOSE OF FRONT SHOCK ABSORBER ASSEMBLY 
    1. Before discarding the shock, drill a hole of 2 to 3 mm (0.079 to 0.118 in.) in diameter at the location shown in the illustration to discharge the gas inside.
      NOTE:
      • When drilling, chips may fly out, so work carefully.
      • The gas is colorless, odorless and nonpoisonous.
        Fig 1: Identifying Front Shock Absorber Assembly
        G04437563Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals