LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> Land Cruiser >> Repair and Diagnosis >> Suspension >> Suspension Control Systems >> Suspension Control >> Pump Attenuator >> Disposal

Pump Attenuator: Disposal

  1. DISPOSE OF PUMP ATTENUATOR 
    1. Place the pump attenuator in a vise and saw a hole between "A" and "B" using a saw to discharge the gas inside.
CAUTION:
  • As the gas is contained a metal bellows saw up to the metal bellows.
  • The gas discharging is colorless, odorless and harmless.
  • Saw a hole while covering the saw with a cloth because chips may fly up.
Fig 1: Sawing Hole Between "A" And "B"
G00455038Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals