LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> Land Cruiser >> Repair and Diagnosis >> Electrical >> Starter >> Starting System >> Acc Cut Relay >> On-Vehicle Inspection

On-Vehicle Inspection

  1. REMOVE ACC CUT RELAY 
    1. Remove the cowl side junction block cover RH.
    2. Remove the ACC CUT relay from the cowl side junction relay block RH.
  2. INSPECT ACC CUT RELAY 
    1. Measure the resistance of the ACC CUT relay.

      Standard resistance 

      ACC CUT RELAY

      Tester Connection Specified Condition
      3 - 4 Below 1 Ω
      3 - 5 10 kΩ or higher
      3 - 4 10 kΩ or higher
      (when battery voltage is applied to terminals 1 and 2)
      3 - 5 Below 1 Ω
      (when battery voltage is applied to terminals 1 and 2)
      Fig 1: Identifying Relay Test Terminals
      G04435556Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      If the result is not as specified, replace the relay.

  3. INSTALL ACC CUT RELAY 
scientia non olet · About LEMON Manuals