Data List / Active Test

HINT:

Using the intelligent tester's DATA LIST allows switch, sensor, actuator and other item values to be read without removing any parts. Reading the DATA LIST early in troubleshooting is one way to save time.

1. Connect the intelligent tester (with CAN VIM) to the DLC3.
2. Turn the ignition switch ON.
3. Read the DATA LIST according to the display on the tester.

   Body ECU 

   DATA LIST REFERENCE
   
   

   Item	Measurement Item / Display (Range)	Normal Condition	Diagnostic Note
   PARKING BRAKE SW	Parking brake switch	ON: Parking brake switch is ON position OF: Parking brake switch is OFF position	-

HINT:

Performing the intelligent tester's ACTIVE TEST allows relay, VSV actuator and other item values to be operated without removing any parts. Performing the ACTIVE TEST early in troubleshooting is one way to save time. The DATA LIST can be displayed during the Active Test.

1. Connect the intelligent tester (with CAN VIM) to the DLC3.
2. Turn the ignition switch ON.
3. Perform the ACTIVE TEST according to the display on the tester.

   Body ECU 

   ACTIVE TEST REFERENCE
   
   

   Item Test	Details	Diagnostic Note
   OPN DOR WRN LGT	Open door warning light ON / OFF	-