Shift Lever: Installation

INSTALL FLOOR SHIFT ASSEMBLY
1. Install the floor shift assembly to the vehicle with the 4 nuts.
  Torque: 12 N*m (122 kgf*cm, 9 ft.*lbf)
  
  HINT:
  
  Tighten them in the order, A, B, C and D.
2. Connect the 3 connectors.
  
  Fig 1: Installing Floor Shift Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL TRANSMISSION CONTROL CABLE ASSEMBLY
1. Connect the floor shift transmission control cable end to the floor shift assembly.
  HINT:
  
  Install it with the uneven surface facing up.
  
  Fig 2: Connecting Floor Shift Transmission Control Cable End To Floor Shift Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY CENTER
HINT:

(See INSTALLATION )
INSPECT SHIFT LEVER POSITION (See ADJUSTMENT )
ADJUST SHIFT LEVER POSITION (See ADJUSTMENT )