DTC Check/Clear

WARNING: This page is about a different variant/trim than selected.

CHECK DTC
1. Connect the intelligent tester to the DLC3.
  
  Fig 1: Connecting Cable Of Intelligent Tester To DLC3
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Turn the ignition switch on.
3. Read DTCs on the tester screen.
  HINT:
  
  Refer to the intelligent tester operators manual for further details.
CLEAR DTC
1. Connect the intelligent tester to the DLC3.
2. Turn the ignition switch on.
3. Clear the DTCs by following the prompts on the tester screen.
  HINT:
  
  Refer to the intelligent tester operators manual for further details.