Inspection Procedure
WARNING: This page is about a different car, the 2007 Toyota Prius. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK CONDITION
- Check with the customer if the vehicle has been turned by a turntable at parking.
OK: Vehicle has not been turned by turntable.
HINT:
If the power switch is turned to the ON (ACC or IG) position while the vehicle is being turned by a turntable, the system may store the angular velocity at this time. For this reason, the vehicle position cursor could deviate.
NG: TURN POWER SWITCH TO ON (IG) POSITION WHEN VEHICLE IS COMPLETELY STOPPED
OK: PROCEED TO NEXT INSPECTION PROCEDURE SHOWN IN PROBLEM SYMPTOMS TABLE
- Check with the customer if the vehicle has been turned by a turntable at parking.