LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> Highlander Limited, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 38 (Engine Control System) >> Mass Air Flow Meter >> Removal

Mass Air Flow Meter: Removal

WARNING: This page is about a different car, the 2007 Toyota Prius. However, it is still accessible from the selected car via links, so may be relevant.
  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
  2. REMOVE RADIATOR SUPPORT OPENING COVER (See  REMOVAL   ) 
  3. REMOVE MASS AIR FLOW METER 
    1. Disconnect the MAF meter connector.
    2. Remove the 2 screws and MAF meter.
      Fig 1: Locating MAF Meter Connector Screws
      G05188984Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals