Camshaft Timing Oil Control Valve Assembly: Installation

WARNING: This page is about a different car, the 2007 Toyota Prius. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY
1. Apply a light coat of engine oil to a new O-ring, then install it to the camshaft timing oil control valve.
2. Install the camshaft timing oil control valve with the bolt.
  Torque: 7.5 N*m (76 kgf*cm, 66 in.*lbf)
  
  NOTE: Be careful that the O-ring is not cracked or jammed when installing it.
3. Connect the camshaft timing oil control valve connector.
  
  Fig 1: Identifying O-Ring To Camshaft Timing Oil Control Valve
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL AIR CLEANER ASSEMBLY (See INSTALLATION )
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
CHECK FOR ENGINE OIL LEAKS
INSTALL RADIATOR SUPPORT OPENING COVER (See INSTALLATION )
PERFORM INITIALIZATION
1. Perform initialization (see INITIALIZATION ).
  NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.