LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> Highlander Limited, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 38 (Engine Control System) >> Camshaft Position Sensor >> Removal

Camshaft Position Sensor: Removal

WARNING: This page is about a different car, the 2007 Toyota Prius. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE RADIATOR SUPPORT OPENING COVER (See  REMOVAL   ) 
  2. REMOVE ENGINE UNDER COVER LH 
  3. REMOVE ENGINE UNDER COVER RH 
  4. DRAIN ENGINE COOLANT (See  ON-VEHICLE INSPECTION  )  
  5. DRAIN HV COOLANT (See  ON-VEHICLE INSPECTION  )  
  6. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
  7. REMOVE INVERTER WITH CONVERTER 
    1. Remove the inverter with converter (See REMOVAL ) .
  8. REMOVE CAMSHAFT POSITION SENSOR 
    1. Disconnect the sensor connector.
    2. Remove the bolt and sensor.
scientia non olet · About LEMON Manuals