LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> Highlander Base, 2.4 D, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 33 (Multiplex Communication) >> DTC Check / Clear

DTC Check / Clear

WARNING: This page is about a different car, the 2007 Toyota Prius. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK DTC 
    1. Connect the intelligent tester (with CAN VIM) to the DLC3.
      Fig 1: Connecting Intelligent Tester To DLC3
      G04474555Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Turn the power switch ON (IG).
    3. Read the DTCs by following the prompts on the intelligent tester screen.

      HINT:

      Refer to the tester operator's manual for further details.

  2. CLEAR DTC 
    1. Connect the intelligent tester (with CAN VIM) to the DLC3.
    2. Turn the power switch ON (IG).
    3. Erase the DTCs by following the prompts on the tester screen.

      HINT:

      Refer to the intelligent tester operator's manual for further details.

scientia non olet · About LEMON Manuals